1.Power on/off : when pressing “doorbell button” or “power button” , the indoor part Will power on and ring ,keep on pressing “power button” for 3 seconds , the device will power off .
2.Take photo: pressing ”doorbell button ” ,the device will power on and take photo; in power on mode ,pressing “power button” it will take photo too.
3.Review photo: In power on mode,press “up button” or “down button” to review photos.
4.Delete all photos: in power on mode or when reviewing photos, press “up button” for three seconds to delete all photos in memory
5.Delete single photo:when reviewing photos, press “down button” for three seconds todelete one photo in memory
6.Select power off time: press “down button” for three seconds to select the power off time :15s/25s/off
Indoor part *1
outdoor part *1
mental Bracket *1
User manual *1
Make sure this fits by entering your model number.
please be advised, you have to drill a hole on your front door before installation.it is not wireless, and do not support external memory card.
Step 1: According to the door thickness to choose a suitable screw, then turn the screw into the screw hole on the barrel of outdoor unit.
Step 2: Insert the barrel together with the FPC through the door peephole, then hold the outdoor part on door in right direction.
Step 3: Take out the metal bracket (the “UP” arrow on the bracket means upward), the FPC pass through the rectangular hole, the screw pass through the round hole of the metal bracket, then to lock the metal bracket with outdoor part tightly.
Step 4: Connect the FPC from outdoor unit to the connector of the indoor unit in right direction.Step 5: The four slots on the back of indoor unit is aligned with four hooks on the metal bracket and buckle up, then pull down indoor unit to lock tightly. Done!