Ring Video Doorbell Pro Installation Guide


 

When it comes to home security, nothing is more important than being able to see and speak with people at your front door, whether you’re home or not. That’s where the Ring Video Doorbell Pro comes in. This popular video doorbell lets you see and speak with anyone at your door, even if you’re not home. Installation is simple, but there are a few things you need to know before getting started. In this installation guide, we’ll walk you through everything you need to know to get your Ring Video Doorbell Pro up and running in no time. So whether you’re a first-time homeowner or just looking for a little peace of mind, read on for all the info you need install your new Ring Video Doorbell Pro.

 

Browse For More Info

 

Related Article:  Video Ring Doorbell Pro Installation

 

 


Ring Video Doorbell Pro Installation

It’s easy to install a Ring Video Doorbell Pro. It only takes a few minutes and can be done with just a few tools. Here’s what you’ll need:

– A drill

– A screwdriver

– A level

– A tape measure

First, find a suitable location for your doorbell. It should be within reach of an electrical outlet, and at a height, that’s comfortable for you to reach. Once you’ve found the perfect spot, use the included template to mark where you’ll need to drill holes for the mounting screws.

Next, drill pilot holes at the marked locations, then use the screwdriver to secure the mounting bracket to the wall.

Now, it’s time to connect the wires. First, remove the faceplate from the doorbell by unscrewing the two screws on the back. Then, using the included wire nuts, connect the wires from your doorbell to the corresponding wires on your house. The red wire is for the power, the black wire is for the ground, and the yellow wire is for the doorbell chime.

Once everything is connected, screw the faceplate back on, and you’re done! Your new Ring Video Doorbell Pro is now installed and ready to use.


Browse For More Tips

Related Article: 

 


Ring Doorbell Pro Installation Without Existing Doorbell

If you don’t have an existing doorbell, you’ll need to install the Ring Doorbell Pro from scratch. This guide will show you everything you need to know to get your new doorbell up and running.

First, you’ll need to drill a hole through your doorframe for the wire. Then, thread the wire through the hole and connect it to the Ring Doorbell Pro.

Next, use the included screws to mount the doorbell to the doorframe. Make sure that the doorbell is mounted level so that it will work properly.

Finally, connect the doorbell to your home’s Wi-Fi network and register it with the Ring app. Once it’s registered, you’ll be able to use all of the features of the Ring Doorbell Pro.

That’s it! With just a few simple steps, you can have your new doorbell installed and ready to use.


Browse For More Tips

Related Article: Video Ring Doorbell Pro Installation

 

 


Ring Doorbell Pro Installation With Existing Doorbell

1. Turn off the power to your doorbell at the breaker.
2. Remove your existing doorbell from the wall.
3. Attach the mounting bracket to the wall using the provided screws.
4. Slide the Ring Doorbell Pro onto the mounting bracket and twist it to lock it in place.
5. Reconnect the doorbell wires to the Ring Doorbell Pro (red to red, and black to black).
6. Turn on the power at the breaker.
7. Use the provided screws to secure the Ring Doorbell Pro to the mounting bracket.
8. Download the Ring app and follow the instructions to set up your device.

The Ring Doorbell Pro is a great addition to any home. With its easy installation and sleek design, it’s sure to give your home an added level of security and peace of mind. Thanks for choosing the Ring Doorbell Pro!


Browse For More Tips

Related Article: Video Ring Doorbell Pro Installation

 

 


Ring Doorbell Pro Installation With Digital Chime

To install your Ring Doorbell Pro with a Digital Chime, you’ll need the following:

-Your existing doorbell wiring
-A digital chime (sold separately)
-A drill and bit set
-A screwdriver
-A level

1. First, you’ll need to remove your existing doorbell. To do this, disconnect the wires from the doorbell and unscrew it from the wall.

2. Next, you’ll need to install your digital chime. To do this, follow the instructions that came with your chime. Once installed, make sure that the volume is set to low.

3. Now you’re ready to install your Ring Doorbell Pro. To do this, connect the wires to the doorbell (matching the colors) and screw it into place. Be sure to use the included mounting plate for a more secure connection.

4. Finally, use the level to make sure your doorbell is level before snapping on the faceplate. And that’s it! Your Ring Doorbell Pro is now installed and ready to use.


Browse For More Tips

Related Article: Video Ring Doorbell Pro Installation

 

 


Ring Doorbell Pro Installation Problems

If you’re having trouble installing your Ring Doorbell Pro, don’t worry – you’re not alone. Many people have run into problems with this particular model, and there are a few common issues that tend to crop up. In this article, we’ll go over some of the most common installation problems and how to solve them.

One of the most common problems people run into is that their Ring Doorbell Pro won’t fit properly in the doorframe. This can be a real pain, especially if you’re trying to install it yourself. The good news is that there are a few things you can do to make it fit better. First, make sure that the mounting bracket is installed correctly. If it’s not, the doorbell will sit too low in the doorframe and won’t work properly. Second, try trimming the bottom of the doorframe with a saw or file so that the doorbell fits snugly.

Another common issue is that the battery life on the Ring Doorbell Pro isn’t great. This is usually due to a few different factors, but the most common one is that people don’t install the doorbell correctly. If you’re having trouble getting your doorbell to stay charged, make sure that you’re following the instructions carefully. In particular, be sure to connect the positive and negative wires correctly – if they’re reversed, the doorbell won’t work properly.

Finally, some people have reported that their Ring Doorbell Pro doesn’t seem to be connecting to their Wi-Fi network correctly. This can be a bit tricky to troubleshoot, but the first thing you should do is make sure that the doorbell is within the range of your router. If it isn’t, try moving it closer or using a different Wi-Fi channel. If all else fails, you may need to factory reset the doorbell and start the installation process from scratch.

These are just a few of the most common problems people run into when they’re trying to install their Ring Doorbell Pro. If you’re still having trouble, don’t hesitate to reach out to Ring’s customer support team for help. They should be able to walk you through the process and get your doorbell up and running in no time.


Browse For More Tips

Related Article: Video Ring Doorbell Pro Installation

 

 


Ring Doorbell Pro Installation Manual

1. Before you begin the installation, please review the following:

-This product is for use with the Ring Doorbell Pro.
-If you have any questions or concerns about this product, please call the support line.

2. What You’ll Need:

– Phillips head screwdriver
– Level
– Drill and 1/8″ drill bit (if needed)
– Tape measure
– Safety glasses (optional, but recommended)

3. Tools & Materials Needed:

– Ring Doorbell Pro (model number 8VR1P6-0EN9)
– Mounting bracket
– 4 screws (2.4 x 25mm)
– 4 wall plugs (2.4 x 25mm)
– Drill and 1/8″ drill bit (if needed)
– Phillips head screwdriver
– Level
– Tape measure
– Safety glasses (optional, but recommended)

4. Installation Steps:

1. Choose your installation location. The ideal location is 4 to 6 feet off the ground, with a clear view of your property. If you have multiple Ring devices, we recommend installing them at least 10 feet apart.

2. Once you’ve selected your installation location, hold the mounting bracket in place and use a Phillips head screwdriver to secure it with the screws provided.

3. With the mounting bracket in place, snap your Ring Doorbell Pro into the bracket.

4. Use the level to ensure your Ring Doorbell Pro is level, then use the screws provided to secure it in place.

5. That’s it! Your Ring Doorbell Pro is now installed and ready to use.

Ring Doorbell Pro Installation With Existing Doorbell

1. Turn off the power to your doorbell at the breaker.
2. Remove your existing doorbell from the wall.
3. Attach the mounting bracket to the wall using the provided screws.
4. Slide the Ring Doorbell Pro onto the mounting bracket and twist it to lock it in place.
5. Reconnect the doorbell wires to the Ring Doorbell Pro (red to red, and black to black).
6. Turn on the power at the breaker.
7. Use the provided screws to secure the Ring Doorbell Pro to the mounting bracket.
8. Download the Ring app and follow the instructions to set up your device.

The Ring Doorbell Pro is a great addition to any home. With its easy installation and sleek design, it’s sure to give your home an added level of security and peace of mind. Thanks for choosing the Ring Doorbell Pro!


Browse For More Tips

Related Article: Video Ring Doorbell Pro Installation

 

 


Ring Doorbell Pro Installation Height

When it comes to installation height, the Ring Doorbell Pro can be installed at either 48″ or 96″ from the ground. This gives you plenty of flexibility when it comes to choosing the right spot for your doorbell. If you have a higher traffic area, you may want to install it at the 96″ height so that people won’t miss it. On the other hand, if you have a lower traffic area, the 48″ height may be just fine.

The important thing is that you choose a spot where the camera will have a clear view of whoever is coming to your door. You don’t want to put it too high or too low, as that could make it difficult to get a good view of your visitors.

The other thing to keep in mind is that the Ring Doorbell Pro needs to be connected to a power source to work. This means that you’ll need to have an outlet nearby so that you can plug it in. If you don’t have an outlet close by, you may need to get creative with your installation. For example, you could use an extension cord or a battery-powered doorbell.

When it comes to installation height, the Ring Doorbell Pro gives you plenty of flexibility. Choose a spot where the camera will have a clear view of whoever is coming to your door. The important thing is that you choose a spot where the camera will have a clear view of whoever is coming to your door. You don’t want to put it too high or too low, as that could make it difficult to get a good view of your visitors.

The other thing to keep in mind is that the Ring Doorbell Pro needs to be connected to a power source to work. This means that you’ll need to have an outlet nearby so that you can plug it in. If you don’t have an outlet close by, you may need to get creative with your installation. For example, you could use an extension cord or a battery-powered doorbell.


This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.